B1 - Nayax Vpos Touch Pulse Interface Optically Isolated 10A Controller Board Kit. Includes 12V power supply for connection to 100~265VAC, Nayax Yellow Pulse Cable. Ideal for the retrofit of coin & bill acceptance operated vending machine applications.

A complete Nayax Vpos Touch Kit. Includes the 12V power supply to be connected to a source of 100~265 VAC, yellow Nayax pulse cable, optically isolated 10A DPST relay, enclosure completely wired to all six (6) Nayx Vpos Touch output signal lines that converge into the green #1 line. Configured for connection to any coin mechanism with N/C or N/O. Default control board output setting is normally closed contacts. Easy connection to virtually any coin mechanism by cutting the coin line and splicing each end of the output wires to the cut wires. The 10A relay is wired with common (white) wire, normally open (black) wire and normally closed (red) wire. The kit powers both the Nayax Vpos Touch and the opto relay board. Easy connection to most pulse applications. Includes connections to install a "STOP" remote push button for customers to end a count up time payment. Eliminates the potential destruction of the Nayax Touch Screen due to customers poking sharp instruments to stop the count up of vending time.

Note: The Nayax Vpos Touch with Antenna and programming is not included. Order XCP PN: 306013-VPTIME. Specify when ordering the configuration on the Nayax Vpos Touch Screen the amount of money per selection desired.

Click this link to "Contact Us" for same day reply.