.0574- Shared Vending VendaVolt RV Electricity Cashless Payment Station Pedestal Kit. Payment From Cell Phone Via Bluetooth For Hour, Day Or Weekly Timer Mode. Designed And Manufactured For; RV 50A/30A/20A Electricity Pedestal Vending

You are reading the ad correctly “Shared Vending!”   

XCP Corp provides the VendaVolt Electricity Vending Cashless Payment Kit.

Your location provides the RV Electricity Pedestal.

Vend for; Hours, Days or Weekly “Click this link”!

Your only cost is for your maintenance person to install the kit

Available on our Annual Vending Agreement.

Click this red link below for a brochure.
RV Campground Electricity Pedestal Cashless Payment Kit 3 Jan 2026

Click this link to “Contact Us” for same day reply.

XCP’s VendaVolt Clear Token products are manufactured using cutting edge Technology. We are the first solution offering a fully integrated Bluetooth LTE solution for virtually any RV 50A/30A/20A Electricity Tower Pedestal! The VendaVolt Clear Token Module exploits a smart phone’s Bluetooth and the phone’s Internet connection to activate almost any electronic or electrical device. The VendaVolt CT-12 payment module is designed to operate in a timer mode. Click this link for a flow chart explanation

The XCP Clear Token Module revolutionizes the payment for RV electricity & water. Operates with a VendaVolt Clear Token app on their cell phones.

At the end of the vend cycle, a text message is sent to the owners cell phone alerting them that the time vend is ended.

Installation Instructions:

1. Switch “OFF” the main 220V electrical source to the RV Electricity Pedestal.
2. Click the 50A/30A/20A circuit breakers to the “Off” position.
3. Drill a 3/4 inch hole in the top of the RV Electricity Pedestal.
4. Install the “Green Ready LED”.
5. Loosen 50A/30A/20A outlet plate screws, tip back the plate to expose the circuit breakers and wires.
6. Place the VendaVolt dual relay mounting plate assembly against the inside cabinet above the 50A/30A/20A circuit breakers.
7. Drill two (2) 3/16 inch holes and mount the VendaVolt dual relay mounting plate with supplied M3 stainless steel screws and nuts.
8. Remove the two (2) 10awg wires from the 50A circuit breaker and the 50A outlet.
9. Connect the supplied black and red wires from the VendaVolt input 50A relay to the 50A circuit breaker.
10. Connect the supplied black and red wires from the VendaVolt output 50A relay to the 50A outlet.
11. Remove the one (1) 10awg wire from the 30A circuit breaker and the 30A outlet.
12. Connect the supplied black wire from the VendaVolt input 30A relay to the 30A circuit breaker.
13. Connect the supplied black wire from the VendaVolt output 30A relay to the 30A outlet.
14. Remove the one (1) 12awg wire from the 20A circuit breaker and the 20A outlet.
15. Connect the supplied black wire from the VendaVolt input 20A relay to the 20A circuit breaker.
16. Connect the supplied black wire from the VendaVolt output 20A relay to the 20A outlet.
17. Connect the 2 position male connector for the “Green Ready LED” to the mating female 2 position connector.
18. Replace the 50A30A/20A outlet plate with original screws.
19. Click the 50A/30A/20A circuit breakers to the “On” position.
20. Switch “ON” the main 220V electrical source to the RV Electricity Pedestal.
    VendaVolt 50A/30A/20A Cashless Payment Station is ready for operation.

Designed and Manufactured For Vending 110~220V Electricity To Virtually Any RV Electricity Pedestal.  Payment is made with the XCP VendaVolt Clear Token Visa & MasterCard Cellular Phone App Cashless Payment.

Clear Token Monthly administrative fee is $5.00 per device. Credit & debit Visa/MasterCard processing fee is included in the annual vending agreement.  The vending commission is 9.95% on each transaction.  The balance of 90.05% is sent directly to your ACH bank account or sent by check.

Click this link to “Contact Us” for same day reply.

XCP Corp, [1] 352-678-3021 or Cell Phone at: [1] 352-585-5400. Also you can text us at [1] 352-585-485-5400. You can also contact our Administrative Sales representative. Angie Cohorn angie@xcpcorp.com.