This VendaVolt has two (2) accumulating (1) timers and two (2) 20A GFCI 110~120V dual outlets with waterproof covers.. The timer relay controller is a 110V dipswitch selectable timer. The dip switches allow programing in minutes and hours of time. Time payment is accumulated from the Nayax Vpos Touch Terminal. Included is a 1/4 inch thick steel 18 inch tall internal bollard mounting base.
The Nayax Vpos Touch FCC ID is: R17ME910G1WW
Product Features Of Two (2) Timers
- Microcontroller Circuitry
- Accumulates 1 to 255 Nayax Vpos Touch Pulses
- Multiple Time Delay Selection
- Encapsulated to withstand the harshest environment.
- 0.5% Repeat Accuracy
- Contacts Rated Up To 20 amps 110VAC
- Input Power Cord 14awg
- UL / cUL Recognized
Mode of Operation
STANDARD INPUT PULSE TOTALIZER & VENDING TIMER Power is applied to the unit at all times prior to and during timing. Nayax pulse input switch closures are counted until their total equals the dip switch setting. At this point the output contact transfers and the time delay begins. Upon completion of the pre-selected time delay the output contact reverts to its original position and the control resets. Removal and re-application of input power will reset the control.
ACCUMULATING VENDING TIMER Power is applied to the unit at all times prior to and during timing. Nayax pulse input switch closures are counted until their total equals the dip switch setting. At this point the output contact transfers and the time delay begins. The green LED indicator lamp located below the duplex outlet illuminates indicating 110~120V is available. For every Nayax pulse payment closure counted, prior to or during timing, the unit adds the time set to the total vending time. When the remaining time is less than 2 minutes, the Time Expiring indicator is activated. If additional pulses are added the Time Expiring indicator is deactivated until the remaining time is again less than 2 minutes.