The VendaVolt has two (2) timers. The 1st timer is a 24 hour timer that has a start and stop time setting. It is a 110V Digital LCD Power Programmable Timer Switch Relay. This 24 hour timer relay provides 110V to the 2nd timer Nayax cashless payment accumulator timer board module
Product Features
- Rated Control Voltage: Input 110V AC ,Output 240V AC ; Contact Capacity: 16A(8)A, 240V AC
- Full Time Range: 1 Min-168 Hours; Programmable: 16 times/week or day
- Internal battery: 1.2V/40mA (rechargeable batteries)
- Power failure memory: 60 days; Operate Temperature: -10 to +40 C
The 2nd timer relay is a 110V dipswitch selectable timer. The dip switches allow programing in minutes and hours of time. This 2nd timer will only operate when the 24 hour timer is in the "On" sequence of time.
Product Features
- Microcontroller Circuitry
- 10 Amp Relay Contacts
- Provides Dry Contact Relay Closure
- Accumulates 1 to 255 Push Button Pulses
(Can operate in parallel with remote push buttons) - Multiple Time Delay Selection
- Encapsulated to withstand the harshest environment.
- 0.5% Repeat Accuracy
- Contacts Rated Up To 30 amps 2hp @ 240 VAC
- UL / cUL Recognized
Mode of Operation
STANDARD NAYAX CASHLESS PAYMENT INPUT PULSE TOTALIZER TIMER
Power is applied to the unit at all times prior to and during timing. The Nayax Cashless Payment pulse input switch closures are counted until their total equals the dip switch setting. At this point the output contact transfers and the time delay begins. Upon completion of the pre-selected time delay the output contact reverts to its original position and the control resets. Removal and re-application of input power will reset the control.
ACCUMULATING PAYMENT TIMER
Power is applied to the unit at all times prior to and during timing. Pulse Nayax input switch closures are counted until their total equals the dip switch setting. At this point the output contact transfers and the time delay begins. For every coin switch closure counted, prior to or during timing, the unit adds the time set to the total vending time. Upon completion of the time delay, the output contact reverts to its original position and the control resets. Removal and re-application of input power will reset the control.
ACCUMULATING TIMER/ LAST PAYMENT INDICATOR Same as ACCUMULATING TIMER except when the remaining time is less than the set time, the last payment indicator is activated. If additional payment pulses are added the last pulse indicator is deactivated until the remaining time is again less than the set time.
