The VendaVolt has two (2) timers. The 1st timer is a 24 hour timer that has a start and stop time setting. It is a 110V Digital LCD Power Programmable Timer Switch Relay. This 24 hour relay provides 110V to the payment station and the incremental 2nd timer.
Product Features
- Rated Control Voltage: Input 110V AC ,Output 240V AC ; Contact Capacity: 16A(8)A, 240V AC
- Full Time Range: 1Min-168Hours; Programmable: 16times/week or day
- Internal battery: 1.2V/40mA (rechargeable batteries)
- Power failure memory: 60days; Operate Temperature: -10 to +40 C
The 2nd timer relay is a 110V dipswitch selectable timer. The dip switches allow programing in minutes and hours of time. This 2nd timer will only operate when the 24 hour timer is in the "On" sequence of time.
Product Features
- Microcontroller Circuitry
- Accumulates 1 to 255 Pulses
- Multiple Time Delay Selection
- Encapsulated to withstand the harshest environment.
- 0.5% Repeat Accuracy
- Contacts Rated Up To 30 amps 2hp @ 240 VAC
- UL / cUL Recognized
Mode of Operation
STANDARD INPUT PULSE TOTALIZER & VENDING TIMER Power is applied to the unit at all times prior to and during timing. Pulse input switch closures are counted until their total equals the dip switch setting. At this point the output contact transfers and the time delay begins. Upon completion of the pre-selected time delay the output contact reverts to its original position and the control resets. Removal and re-application of input power will reset the control.
ACCUMULATING VENDING TIMER Power is applied to the unit at all times prior to and during timing. Pulse input switch closures are counted until their total equals the dip switch setting. At this point the output contact transfers and the time delay begins. For every coin switch closure counted, prior to or during timing, the unit adds the time set to the total vending time. Upon completion of the time delay, the output contact reverts to its original position and the control resets. Removal and re-application of input power will reset the control. ACCUMULATING VENDING TIMER/ LAST COIN INDICATOR Same as ACCUMULATING VENDING TIMER except when the remaining time is less than the set time, the last pulse input indicator is activated. If additional pulses are added the last pulse indicator is deactivated until the remaining time is again less than the set time.
