A complete Nayax Vpos Touch Kit. Includes the 20~26VAC & 17-40VDC with a 1.5A 12VDC output power supply with wiring, yellow Nayax pulse cable, optically isolated 10A DPST relay, enclosure completely wired for #1 green pulse signal line or can be connected to all six (6) Nayax Vpos Touch output signal lines.
Most laundry washers & dryers, car wash or vac's have 24VAC available to operate the coin mechanism and bill acceptor. Easy connection to that 24 VAC with the XCP Nayax installation kit. The XCP supplied 20~26VAC & 17-40VDC 1.5A converter power supply provides the power for the Nayax Vpos Touch.
Configured for connection to any coin mechanism with N/C or N/O. Default control board output setting is normally closed contacts. Easy connection to virtually any coin mechanism by cutting the coin line and splicing each end of the output wires to the cut wires. The 10A relay is wired with common (white) wire, normally open (black) wire and normally closed (red) wire. The kit powers both the Nayax Vpos Touch and the opto relay board. Easy connection to most pulse applications. Includes a "STOP" remote push button for customers to end a count up time payment. Eliminates the potential destruction of the Nayax Touch Screen due to customers poking sharp instruments to stop the count up or count down of vending time. Click this YouTube Video
Nayax Vpos Touch Interface Optically Isolated 10A Controller Board Kit. Includes 24VAC converter to 12VDC power supply, Red "STOP" Push Button and Nayax Yellow Pulse Cable. Ideal for the retrofit of coin operated laundry or car wash bays & vac's!. SKU: 301002-000
Instructions for connection to a 24VAC electrical source to convert to 12V for operation of the Nayax Vpos Touch. Allows use of a momentary "STOP" button to trigger the Nayax VPOS Touch to halt either count up or count down timing.
Click this link to "Contact Us" for same day reply.